The perfect prep before applying Ceramic Coat!
Optimum Paint Prep uses a combination of mild solvents to dissolve old wax, remove polishing and compounding oils, and leave behind a residue-free, squeaky clean surface. Use Optimum Paint Prep before applying Optimum Gloss Coat, or any paint coating, to promote maximized bonding and protection. Before paint protection comes paint cleaning!
Generally, before applying any type of surface protection, be it a wax, sealant, or semi-permanent coating, you want to get the paint shining and perfect. However, most compounds and polishes leave behind oils that can prevent your selected last step product from adhering fully and correctly. To be sure you get the best protection available, you must be sure your paint is fully prepped. And this is where Optimum Paint Prep comes in handy.
Optimum Paint Prep uses a combination of very mild solvents, nothing too harsh, just enough to remove all former waxes, polishes, compounds, or anything else that would prevent your LSP from bonding. Optimum Paint Prep does not contain any oils or surfactants and will leave no residue behind – simply a clean surface!
Because Optimum Paint Prep contains no oils or surfactants, it is perfectly safe to be used on any surface needing a quick clean. Be it exterior or interior, every dirty surface can be quickly cleaned using Optimum Paint Prep.
Before you put the time and energy into applying Optimum Gloss Coat for the best protection, make sure your surface is ready for “optimum” adhesion with Optimum Paint Prep. Simply spray Optimum Paint Prep onto surface and wipe off using a clean, soft, microfiber towel. The paint should look and feel smooth and clean. Repeat in affected areas, if necessary.
